Run two zones for 20 minutes each and you'd expect them to get the same water. Usually they don't, not even close. The difference is the hardware in the ground, and it's one of the most overlooked settings in irrigation.
Every head waters at its own speed
Irrigation pros talk about precipitation rate: how many inches of water a sprinkler puts down in an hour. It varies enormously from one type of head to another.
- Spray heads pop up and throw a fan of water over a short distance. They're fast, and a typical spray zone can put down three to four times as much water per hour as a rotor zone.
- Rotors send a single stream that sweeps slowly over a large area. They water gently and cover a lot of ground.
- Drip doesn't spray at all. It delivers water a little at a time, right at the roots, and it's measured in gallons per hour rather than inches.
So 20 minutes on a spray zone and 20 minutes on a rotor zone are very different waterings. A controller that treats them the same will drown one zone or starve the other.
Why it matters for your yard
Put down water faster than the soil can take it in and the extra runs off into the gutter. Put it down too slowly and the roots never get a proper drink. The right run time depends on both the soil, which we covered in our post on USDA soil data, and the heads.
It's also why good installers keep different head types on separate zones. Sprays and rotors on the same valve can never both be right.
Close enough isn't good enough
Many smart controllers give you six or seven head types to choose from. If what's in your yard isn't on the list, you pick the closest one, and every run time for that zone inherits the error.
Verdant offers 11 nozzle types, so each zone can match what's actually installed:
- In-ground sprinklers: spray, rotor and multi-stream rotary nozzles.
- Low-volume watering: drip emitters, drip line and bubblers.
- Classic and hose-end sprinklers: oscillating, impact, pulsating, stationary, and whirling or rotary.
That last group matters more than you'd think. Plenty of yards still have older impact heads, or a garden bed watered by a sprinkler on the end of a hose. Those deserve the right run time too.
What it means for your yard
When each zone knows what's in the ground, run times fit the hardware instead of a guess. That means less runoff, fewer dry spots and less wasted water. Your installer sets it once, zone by zone, and it stays right.
Next time: soak and cycle, and how Verdant's patent-pending scheduling gets the timing right.
See every feature on the Features page, or find an installer near you.
The Verdant team