Skip to Content

Soil from the USDA, not a guess

Your controller looks up the soil under your yard, so every zone starts from real data instead of a guess.

Table of contents

No titles in the blog post

Many controllers ask you a question during setup that almost nobody can answer: what kind of soil do you have? Most people pick whatever sounds right and never think about it again. Verdant starts with the answer. Your controller looks it up.

Why soil matters so much

Think of the ground under your lawn as a sponge. How big the sponge is, and how fast it soaks up water, depends almost entirely on the soil.

  • Sandy soil takes water in quickly but can't hold much of it. It needs smaller, more frequent waterings, or the water drains past the roots.
  • Clay soil holds a lot of water but takes it in slowly. Water it too fast and the extra runs off into the street.
  • Loam sits in between, which is why gardeners love it.

Get the soil wrong and every other setting is off. A controller that thinks it's watering sand will water a clay yard too often. One that thinks it's watering clay will leave a sandy yard thirsty between waterings.

The trouble with guessing

A setup screen that asks you to pick a soil type assumes you know the answer. Most homeowners don't, and there's no shame in that. Soil changes from one neighborhood to the next.

A soil test would settle it, but it costs time and money, and almost nobody does one before installing a sprinkler controller. So the guess goes in, and the controller spends years making careful calculations from a wrong starting point.

What Verdant does instead

The United States already has a detailed soil map. For more than a century, the USDA's soil survey has mapped the country's soils, county by county. Farmers, engineers and builders rely on that data, and it's free and public.

Your Verdant controller knows its own latitude and longitude. It sends those coordinates directly to the USDA's soil data service and gets back the mapped soil for that exact spot. That becomes the default soil type, one of seven from sand to clay, and it can be applied to every zone in one step. No soil test, and no guessing.

The lookup goes straight from your controller to the USDA. It doesn't pass through Verdant, and we never see your location. That's part of our promise of no data harvesting.

You still have the final say

A soil map describes the ground as nature left it. Yards don't always stay that way. Topsoil gets trucked in for a new lawn, flower beds get amended, and builders backfill around a new foundation. Sometimes the front yard and the back yard really are different.

So every zone keeps its own soil setting. The USDA answer is the starting point, and you or your installer can change any zone where you know better. Nothing gets overwritten without asking first.

See your own soil

Curious what's under your lawn? The USDA's Web Soil Survey lets anyone draw an area on a map and see the soil there. It's the same public survey your controller uses.

What it means for your yard

When the controller starts from the real soil, it waters the right amount, at the right frequency, for the ground it's actually watering. That means fewer puddles running down the driveway and fewer dry spots between waterings, without anyone having to guess at setup.

Soil is one of several things Verdant looks up for its exact location instead of guessing. Next time we'll explain why we don't rely on your ZIP code for any of it.

See every feature on the Features page, or find an installer near you.

The Verdant team

Archive

Why we built Verdant
A sprinkler controller should be the most boring thing you own. Here's why most aren't, and what we're doing about it.