Almost every smart controller says it waters by "ET." Ask which ET, calculated how, from what data, and the answer is usually silence. We think you deserve to know how your water is being decided, so here's exactly what Verdant uses.
A quick refresher on ET
Evapotranspiration, or ET, is the water a lawn loses each day: some evaporates from the soil, and the rest is drawn up through the grass and released into the air. Sun, heat, wind and dry air all push it up. Cool, cloudy, still days pull it down.
Scientists measure it against a standard reference, a well-watered grass surface, and call that reference ET, written ET₀. Your controller uses ET₀ to work out how much water each zone has lost, and how much to put back. Get ET wrong and everything downstream is wrong too.
Three published ET models
Verdant offers three ways to calculate ET₀. Each one is built on published, peer-reviewed science.
- ASCE Penman-Monteith. The standardized reference ET equation published by the American Society of Civil Engineers (ASCE-EWRI, 2005). It's widely used in U.S. irrigation and water management, and it's Verdant's first choice.
- FAO-56 Penman-Monteith. The international standard, published by the Food and Agriculture Organization of the United Nations in Irrigation and Drainage Paper 56 (Allen and others, 1998). It's a closely related approach from the same family, and it's widely used in irrigation research around the world. You can choose it instead if you prefer.
- Enhanced Hargreaves-Samani. Hargreaves and Samani's method (1985) estimates ET₀ from daily high and low temperatures and the sunlight that reaches the top of the atmosphere at your latitude on that date, which can be calculated without a weather station. Verdant's version adds climate-aware calibration and normalization: it sets a regional ET₀ baseline and accounts for seasonal variation, rather than relying on the raw estimate alone.
In ET mode, Verdant doesn't just look at today's number. It keeps a running water balance for the soil, adding rain and irrigation and subtracting what the weather took out, so each zone gets what it has actually lost.
Why more than one model?
Because the best model is the one your weather data can actually support.
The Penman-Monteith models are the most complete. They need a full set of inputs: temperature, humidity, wind, solar radiation and the site's elevation. Not every weather source provides all of that. Some public forecast services don't publish solar radiation at all.
Hargreaves-Samani works from a much smaller set of inputs, which is why it has been a trusted fallback in irrigation for decades, and why we put the extra work into calibrating it.
In Auto mode, Verdant uses ASCE Penman-Monteith whenever it has everything that model needs. If a required input is missing, it falls back to Enhanced Hargreaves-Samani for as long as it has to, and moves back up when the data returns. Watering never stops just because a weather source left out one measurement. And the controller never pretends: it keeps track of the model you asked for and the model it's actually using, and it tells you when it had to fall back, and why.
Seasonal: an honest alternative
Some people prefer a simpler approach, or have a site where daily weather data isn't practical. For them, Verdant offers a seasonal mode.
Traditional seasonal adjustment often cuts watering by a fixed percentage because the calendar says it's autumn. But the calendar isn't the weather, and two days in the same month can need very different amounts of water. Verdant keeps those ideas separate. In seasonal mode it applies a seasonal budget percentage to each zone's baseline run time, and you can scale that budget up or down to suit your yard.
Verdant calculates its seasonal budget separately from its ET budget, so you can see the difference. Pro savings reports show what a fixed baseline, the seasonal budget and ET would each have used, side by side.
And if you'd rather have no adjustment at all, you can turn it off and run fixed times, like a traditional timer. We don't recommend it, but it's your yard.
Why it matters that we tell you
"ET" on a product page isn't a model. Without knowing which equation is behind it and what data feeds it, there's no way to judge whether it's right for your yard, or to check its work.
Verdant's models are the published standards, named and cited. Every report names the model that was used, and the free daily report shows that day's ET₀. An installer can compare it with a local weather station, and a curious homeowner can look up the papers. That's what transparency looks like.
What it means for your yard
Your water is decided by real, published science, using the best model your weather data supports. You can always see which model that is, and why. No black box, and nothing to take on faith.
See every feature on the Features page, or find an installer near you.
The Verdant team